HyperFlow Intercoolers

MY01-07 WRX & STI Top Mounted Intercooler

Features:

•  Bar and Plate intercooler core with measurements of 115 x 485 x 85mm
•  Less than 1psi of pressure drop
•  High flowing lightweight CNC machined billet end tanks carved from billets of 6061-T6 aluminium
•  Includes with high flowing cast aluminium turbo/intercooler plumbing
• Any aftermarket blow off valve that is designed for the 01+ WRX will bolt straight on
•  CNC machined brackets to ensure a perfect fit
•  Largest top mounted intercooler on the market
•  Easy to fit
•  Able to be installed with most strut braces

MY01-07 WRX & STI Front Mounted Intercooler

Features:

•  Bar and Plate core with measurements of 90 x 670 x 240
•  High flowing cast end tanks
•  Mandrel bent alloy intercooler plumbing
•  4 ply Silicon/Nomex lower intercooler plumbing
•  Retains factory fog lights
•  Includes adaptor to mount factory blow off valve
•  Does not require battery to be replaced
•  Includes pre-fabricated bar support panel for easy (no metal cutting) installation
•  Includes billet pod air intake

MY97-98 and MY99-00 WRX Top mounted Intercooler

Features:

• Bar and Plate intercooler core
• Less than 1psi of pressure drop
• High flowing lightweight CNC machined Billet end tanks now with unique “Dual entry splitter”
• Includes with high flowing silicone/aluminium turbo “Y” hose kit
• CNC machined brackets to ensure a perfect fit
• Largest top mounted intercooler for this model
• Easy to fit
• Able to be installed with most strut braces

MY97-98 and MY99-00 WRX Front mounted Intercooler

Features:

•  Bar and Plate core with measurements of 660x285x90mm
•  High flowing hand made end tanks
•  4 ply Silicon/Nomex intercooler plumbing Retains factory fog lights
•  Includes adaptor to mount factory blow off valve
•  Does not require battery to be replaced
•  Includes K&N air intake pod filter

Subaru GT Liberty TMIC MY03 onwards

Features:

•  Bar and Plate intercooler core
•  Low pressure drop
•  High flowing lightweight aluminium end tanks
•  Any aftermarket blow off valve that is designed for the factory model will bolt straight on
•  All brackets ensure perfect fit
•  Supplied polished
•  Largest top mounted intercooler on the market
•  Easy to fit (Direct bolt on replacement)

S15 200sx Front Mounted Intercooler

Features:

•  Bar and Plate core with measurements of 90 x 670 x 240mm
•  High flowing cast end tanks
•  Includes with replacement Odyssey battery (allows clearance for minimal intercooler pipe length)
•  4 ply Silicon/Nomex intercooler plumbing
•  Easy installation

Toyota Supra MkIV (93-98) Upgrade Front Mounted Intercooler

Features:

•  Bar & plate intercooler core with measurements of 660 x 290 x 90mm
•  Mandrel bent polished aluminium upper intercooler plumbing
•  Mandrel form re-enforced 4-layer silicon lower intercooler plumbing
•  Silicon hose with heavy duty stainless steel clamps
•  Supplied with replacement radiator overflow bottle
•  Easy installation

Mitsubishi EVO 7/8/9 Upgrade Front Mounted Intercooler

Features:

•  Bar and plate core with measurements of 610 x 300 x 90mm
•  High flowing polished cast end tanks

 Comes in 2 stages:

• Stage 1: Intercooler core with tanks, mounting brackets and silicon hose joiners. Stage 1 kit is compatible with the factory intercooler plumbing
• Stage 2: Includes all parts in stage 1 + a complete new polished mandrel bent aluminium intercooler pipe set. These upgraded pipes have very few bends for minimal pressure drop

VL Turbo Commodore Intercooler

Features:

•  600 x 300 x 90mm bar and plate intercooler core
•  Mandrel bent and polished aluminium intercooler plumbing
•  Silicon hose joiners
•  Stainless steel heavy duty hose clamps
•  Supplied with pod air intake kit with K&N air filter
•  Easy bolt in installation
   

Copyright^© 2003-2008, S & J Automotive Accessories
Phone: (08) 8277 2222 Email: info@SJAutomotive.com.au
ABN: 12 852 639 235
All third party logos, brands and marks appearing on this web site are
acknowledged as being the property of their respective owners.